Setting SRI and Mileage
NOTE: Instrument cluster must be coded before setting if it was replaced.
- Press button -1- to select "Rapid data transfer" operating mode 1.
Indicated on display
Rapid data transfer HELP
Insert address ward XX
- Press buttons -1- and -7- to insert "Instrument Cluster" address word 17.
Indicated on display
Rapid data transfer Q
17- Instrument Cluster
- Press -Q- button to confirm input.
Indicated on display
Rapid data transfer
Scan Tool sends address word 17
After 5 seconds the display indicates a part number and the control module code.
4D0919033C4 Instrument cluster D03 -->
Coding 00262 WSC 06812
- Press -> button.
Indicated on display
Rapid data transfer Q
Select function XX
Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX
SRI, oil change indicator, resetting (distance)
NOTE:
- Setting of service interval display must be done in kilometers. Therefore calculate the value from miles to kilometers. Multiply miles by 1.6 to convert to km.
- Adaptation number is for example only.
- Press buttons -0- and -5- to select channel 5.
- Press -0- button to confirm input.
Indicated on display
Channel 5 Adaptation 15 ->
<- 1 3 ->
- Advance through program with - button.
Indicated on display
Channel 5 Adaptation 15 Q
Input adaptation value XXXXX
- Input 5 digit adaptation value between 0 km (00000) and 15000 km (00015).
The value can be entered in steps of 1000 km
Example: 7500 mi/2000 km, therefore enter 00012.
Indicated on display
Channel 5 Adaptation 15 Q
Input adaptation value 00012
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 12 Q
<- 1 3 ->
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 12 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 12 Q
Changed value is stored
- Press - button to end coding.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX
SRI, inspection indicator (In 1), resetting (distance)
NOTE: Setting of service interval display must be done in kilometers. Therefore calculate the value from miles to kilometers. Multiply miles by 1.6 to convert to km.
- Press buttons -0- and -6- to select channel 6.
- Press -Q- button to confirm input.
Indicated on display
Channel 6 Adaptation 30 ->
<- 1 3 ->
- Press - button to advance through program sequence.
Indicated on display
Channel 6 Adaptation 30 Q
Input adaptation value XXXXX
- Enter value between 0 km (00000) and 30000 km (00030).
The value can be entered in steps of 1000 km.
Example: 15000 mi/24000 km, therefore enter 00024.
- Press -Q- button to confirm input.
Indicated on display
Channel 6 Adaptation 24 Q
<- 1 3 ->
- Press -Q- button to confirm input.
Indicated on display
Channel 6 Adaptation 24 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 6 Adaptation 24 -->
Changed value is stored
- Press -> button to end coding.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX
SRI, inspection indicator (In 1), resetting (time)
- Press button -0- and -7- to select channel 7.
- Press -Q- button to confirm input.
Indicated on display
Channel 7 Adaptation 36 -->
<- 1 3 ->
- Advance through program sequence with - button.
Indicated on display
Channel 7 Adaptation 36 Q
Input adaptation value XXXXX
- Enter adaptation value between 0 days (00000) and 360 days (00036). The value can be entered in steps of 10 days. Example: 360 days, therefore enter 00036.
NOTE: Inspection table, Replacing
- Press -0- button to confirm input.
Indicated on display
Channel 7 Adaptation 36 Q
<- 1 3 ->
- Press -Q- button to confirm input.
Indicated on display
Channel 7 Adaptation 36 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 7 Adaptation 36 ->
Changed value is stored
- Press - button to end coding.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX
SRI, inspection indicator (In 2), resetting (time)
- Press button -0- and -8- to select channel 8.
- Press -Q- button to confirm input.
Indicated on display
Channel 8 Adaptation 66 -->
<- 1 3 ->
- Advance through program sequence with - button.
Indicated on display
Channel 8 Adaptation 66 Q
Input adaptation value XXXXX
- Enter Adaptation value between 0 days (00000) and 730 days (00073). The value can be entered in steps of 10 days. Example: 730 days, therefore enter 00073.
- Press -0- button to confirm input.
Indicated on display
Channel 8 Adaptation 73 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 8 Adaptation 73 Q
Changed value stored
- Press -> button to end coding.
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10.
Indicated on display
Rapid data transfer Q
10 - Adaptation
- Press -Q- button to confirm input.
Indicated on display
Adaptation
Insert channel number XX