Leak Detection Pump: Service and Repair

Fuel System Leak Detection Pump; Removing And Installing

NOTE: The fuel system leak detection pump -V144- is located in the right rear wheelhousing under the liner.

- Remove right-rear wheel.
- Remove wheelhousing liner.





- Disconnect line -1- to EVAP canister.
- Disconnect line -2- to air filter.
- Disconnect harness connector -3- for EVAP canister purge solenoid valve -N115-.
- Unscrew bracket for leak detection pump -V144- and disconnect control line -4-.

- Installation is in reverse order of removal.