Power Seat Switch: Service and Repair

WARNING!
Before starting work on seats, connect VAS5094 airbag adapter. Electrical / Mechanical Repair


CAUTION!
Only the switch circuit board can be removed. The switches in the side seat trim cannot be replaced separately.


NOTE: The switch unit circuit board is ins tailed in the side seat trim on door sill side.


1 - Plastic cover
2 - Bolts (4x)
3 - Switch unit circuit board with wiring harness
Removing:
- Move seat to bottom-most position.
- Remove seat. Service and Repair
- Remove door sill side seat trim. [1][2]Procedures
- Cut all tie wraps on wiring harness using diagonal cutter.
- Disconnect all wiring harness connectors to circuit board.
- Remove bolts -2- (4x) at plastic cover -1- located above circuit board -3-.
- Remove plastic cover -1-.
- Remove bolt -4-.
- Carefully remove circuit board.

Installing:
- Carefully install circuit board so circuit board contacts seat correctly on contacts for switch located in side seat trim.
4 - Bolt (1x)