With Manufacturer Scan Tool

Erase DTC Memory (Scan Tool Function 05)


NOTE:
- The function status register will be reset when DTC memory is erased.
- If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked,
- All malfunctions repaired

After successful DTC memory check:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5-. This selects "Erase DTC Memory", function 05.

Indicated on display


Rapid data transfer Q
05 Erase DTC Memory


- Confirm input using the -Q- button.

Indicated on display


Rapid data transfer ->
DTC memory is erased!


DTC memory is erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence.


Attention! ->
DTC memory was not interrogated


- This message indicates an error in the test sequence.


Rapid data transfer ->
DTC memory was not interrogated


Follow test sequence exactly: first check DTC memory, repair malfunction(s) if necessary, then erase.