Cover and Padding For Seating Area Extension, Removing and Installing

Cover And Padding For Seating Area Extension, Removing And Installing







1 - Seat cushion extension
2 - Cover
Removing:
- Move seat fully up.
- Remove seat.
- Remove seat cushion extension.
- If installed, disconnect seat heater wiring.
- Pry out grip channel - 4 - from insertion channel - 3 -.
- Remove cover - 2 -.
- Pull cushion - 5 - from seat cushion extension support - 1 -.
Installing:
- Turn cover edge together with grip channel - 4 - inward.
- Push grip channel - 4 - into insertion channel - 3 -.
3 - Insertion channel, all around
4 - Grip channel at cover edge
5 - Cushion