Code Control Module (Scan Tool Function 07)

This function is used to code the instrument cluster with the following information:
- Optional equipment
- Country specific variations (market versions)
- Number of cylinders
- Engine versions


NOTES:
- Coding sets the various combinations of the on board computer and check package according to the optional equipment, country specific variations, number of cylinders and engine version.
- The coding table only contains coding combinations for the Audi A4.


Initiating instrument cluster coding

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.

Indicated on display


Code control module Q
Input code number XXXXX (0-32000)


- Input code number using Coding table, see below. Example: 00262

00 no optional equipment
2 Country: USA
6 6-cylinders
2 Gasoline engine

- Indicated on display (example).


Code Control Module Q
Input code number 00262 (0-32000)


- Press -Q- button to confirm input

Indicated on display


8D0919930L B5-INSTRCLUST VDO X16
Coding 00262 WSC 06812


- Press -> button to end coding process.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -6-.

Indicated on display


Rapid data transfer Q
06 - End Output


- Press -Q- button to confirm input

Coding Table







NOTES:
- Depending on the vehicle equipment, coding for optional equipment is also possible for various combinations.
- If more than one option that can be coded is installed, the coding must be entered as the sum of the individual coding numbers.


Examples
- Washer fluid level indicator and brake pad wear indicator:
04 + 01 = 05
- Seat belt warning system and washer fluid level indicator:
02 + 04 = 06