Center Console Switches, Removing and Installing

CAUTION!
Disconnect the battery Ground (GND) strap before working on the electrical system


NOTE:
- Before disconnecting the battery, determine the correct coding for the anti-theft radio.
- After reconnecting the battery, check and activate the vehicle's electrical equipment (radio, clock, comfort and convenience features, etc.).


Removing







- Insert small screwdriver or flat plastic tool as shown, press against opposite side of switch and pry off switch plate.
- Tape off area above switches or front of radio with masking tape, if necessary.







- Pull switch out forward using standard or flat-nose pliers.
- Disconnect harness connector.

Installing
- Press switch plate onto switch so it engages audibly.
- Connect harness connector and press switch in by hand as far as possible.