Undamaged Side Window (Sedan), Installing

Undamaged Side Window (Sedan), Installing

- When reusing an undamaged window, cut remaining adhesive sealing material on window and flange using carpet knife until even, but do not remove completely!
Leftover material is required as a base for better adhesion of the new adhesive sealing material.
- Keep surface free of dirt and grease.

CAUTION: Do not prime bonding surface or treat with cleaning solution.

NOTE: Adhesive sealing material DH 009 100 03 (small cartridge) is recommended when bonding a single window; D 004 300 05 (2K- adhesive) is recommended when bonding more than one window.

- Insert window in window cutout and secure with adhesive tape.
- Secure molding at C-pillar using rivet.







- Apply adhesive material to leftover material around edge.

- Dimension - a - = 12 mm
- Dimension - b - = 8 mm

NOTE: Reduce the thickness of the adhesive bead by the dimension of the leftover material on the window and window flange.