Erase DTC Memory and End Output (Function 05 and 06)

NOTE:
- At the same time DTC memory is erased, resetting of the function status register takes place
- If DTC memory cannot be erased, check DTC memory again and repair malfunction.


Requirements
- DTC memory checked.
- All malfunctions repaired.

After successful DTC memory check:

Indicated on display


Rapid data transfer HELP
Select function XX


- Press 0 and 5 buttons to select "Erase DTC memory" function 05.

Indicated on display


Rapid data transfer Q
05 Erase DTC memory


- Press Q button to confirm input

Indicated on display


Rapid data transfer ->
DTC memory is erased


DTC memory is erased.

- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


NOTE:
- This message indicates an error in the test sequence.


Attention! ->
DTC Memory is not interrogated


- This message indicates an error in the test sequence.


Rapid data transfer ->
DTC Memory is not interrogated


- Adhere exactly to the test sequence: first check DTC memory, repair malfunctions as necessary, then erase DTC memory.


End output

- Press 0 and 6 buttons to select "End output" function 06.

Indicated on display


Rapid data transfer Q
06 - End output


- Press Q button to confirm input

Indicated on display


Rapid data transfer HELP
Enter address word XX


- Switch off ignition.
- Disconnect harness connectors for the VAG1551 scan tool