Track 75-85

Engine Control Module - Track 75-85:

COMPONENTS
N18 - EGR Vacuum Regulator Solenoid Valve
N80 - Evaporative Emission (EVAP) Canister Purge Regulator Valve
S27 - Fuse in auxiliary fuse holder (Engine Control II)
G108 - Heated Oxygen Sensor (HO2S) 2
G39 - Heated Oxygen Sensor (HO2S) 1
N71 - Idle Air Control (IAC) Valve
N156 - Intake Manifold Change-Over Valve
J192 - MFI Engine Control Module (ECM)
Z19 - Oxygen Sensor (O2S)1 Heater
Z28 - Oxygen Sensor (02S)2 Heater
J221 - Shift Lock Control Module

CONNECTORS
T1a - Wire connector, single, in engine compartment, right
T1r - Wire Connector, single, in engine compartment, right
T2ac - Wire Connector, double, black, in engine compartment, right
T2cb - Wire Connector, double, black, in engine compartment, right
T6h - Wire Connector, 6 point, black, behind instrument panel, left

GROUND CONNECTIONS

NOTE: Grounds connections are indicated on the diagram by a numeric code inside a circle

200 - Ground connection shielding), in engine compartment wiring harness

HARNESS SPLICES

NOTE: Harness splices are points inside a wiring harness where two or more wires are crimped and/or soldered together. Harness splices are indicated on the diagrams by an alphanumeric code inside a circle

D9 - Plus connection (15, via fuse 27), in right front Wiring harness