Replacement

NOTE:
^ Install ATF lines into transmission up to stop.
^ Always replace O-rings, and lubricate them with ATF before installing.
^ After installation check ATF level.

1. Bolt
Tighten to: 5 Nm (44 inch lbs)
2. O-ring
3. Union nut
Tighten to: 25 Nm (18 ft lb)
4. Bolt
Tighten to: 10 Nm (84 inch lb)
5. Bolt
Tighten to: 20 Nm (15 ft lb)
6. O-ring