Rear Lid Lock and Handle Mechanism, Removing and Installing

Rear Lid Lock And Handle Mechanism, Removing And Installing







1 - Rear lid lock
- To remove, swing out hinge arm - 2 - from operating rod - 4 - and unhook from rear lid lock.
- Remove nuts - 3 - and remove rear lid lock.
2 - Hinge arm
- After installing rear lid lock, swing it over operating rod
3 - Nuts
- 8 Nm (71 in.lb)
4 - Operating rod
5 - Nut
- 8 Nm (71 in.lb)







6 - Handle mechanism

Removing:
- Remove rear lid trim.
- Unclip operating rod - 4 - from handle mechanism.
- Unscrew nuts - 5 - and remove handle mechanism.

7 - Rear lid lock actuator
8 - Lock cylinder

Removing:
- Remove release handle.
- Remove operating rod.
- Remove lock cylinder out of handle mechanism.

9 - Rear lid lock motor
10 - Screws (2x)
- 1.2 Nm (11 in.lb)
11 - Operating rod.