Front Door Handle and Door Lock, Assembly Overview

Front Door Handle And Door Lock, Assembly Overview







1 - Door handle mount
2 - Lock cylinder
- Before removing, remove door handle
3 - Fulcrum lever
4 - Door handle
5 - Door lock
- Disengage operating rod -8- from fulcrum lever -3- prior to removing door lock.
- To remove, remove socket-head bolts -6- and remove door lock out downward.
6 - Socket-head bolt (M8)
- 20 Nm (15 ft lb)
7 - Locating pin
- For securing door lock in "zero" position (only installed on replacement part)
- After installing door lock and installing operating rod -8-, remove locating pin.
8 - Operating rod
- To remove door lock, disengage operating rod from fulcrum lever -3-.
9 - Operating rod (door lock)