Connector For Sender For Fuel Gauge -G-, Terminal Assignments

Vehicles with front-wheel drive:

The sender for fuel gauge -G- is located under the floor covering of the luggage compartment.
- Remove floor covering.







- Remove screws (arrows) and remove cover -1-.
- Remove connector.

4-pin connector for fuel gauge sender -G-, terminal assignments







1 - Positive signal for fuel pump
2 - Wire from sender for fuel gauge -G- to instrument cluster (fuel gauge)
3 - Ground connection for sender for fuel gauge -G-
4 - Ground connection for fuel pump

Vehicles with all-wheel drive:

Vehicles with all-wheel drive have three fuel gauge senders connected in series.

One of the fuel gauge sender harness connectors is located under the floor covering in the luggage compartment. Removing connector.
The other two fuel gauge sender connectors are located under the rear seat bench.

- Remove rear seat bench







- Remove screws (arrows) and remove covers -1- and -2-.
- Remove harness connectors.







1 - Positive signal for fuel pump
2 - Wire from sender for fuel gauge to instrument cluster
3 - Ground connection for sender for fuel gauge
4 - Ground connection for fuel pump

2-pin Connector At Sender II For Fuel Gauge -G169-:

1 - Wire (black) to sender III
2 - Wire (blue) to sender III

2-pin Connector At Sender II For Fuel Gauge -G169-:

1 - Wire (black) to sender II
2 - Wire (blue) to sender II