Code Control Module
Code Control Module (function 07)
The control module can be encoded as follows using this function:
^ Manufacturer
^ Configuration
^ Target pressure, partially laden
Note: The code table lists only the possible combinations applicable to the Audi A6 Allroad.
Perform encoding
Display:
^ Press Buttons 0 and 7 (Button 07 selects the "Code Control Module" function).
Display:
^ Confirm the entry using the Q button.
Display:
^ Enter the code number using the code table enter.
Encoding: 20329
^ 1st position = Manufacturer: 2 = Audi
^ 2nd position = 0
^ 3rd position = Configuration: 3 = 4 antennas, 4 wheels, four-wheel monitoring
^ 4th position = Target pressure partially laden: 2 = X.2 bar
^ 5th position = Target pressure fully laden: 9 = X.9 bar
^ The control module identification appears on the display with the code entered (20329).
^ Terminate encoding using the button.
Display
^ Press Buttons 0 and 6.
Display:
^ Confirm entry using the Q button.
Code table
1)Use if only an "Emergency spare wheel" is carried.
^ The control module identification appears on the display with the code entered (20129).
^ Terminate encoding using the button.
Display:
^ Press Buttons 0 and 6.
Display:
^ Confirm entry using the Q button.