Control Arm

Rear
Control arm to axle beam 70 Nm + 90
Always use new bolts.
Control arm to wheel bearing housing 95 Nm
Shock absorber to control arm 70 Nm + 90
Always use new bolts.
After installation, position of steering wheel must be checked with a road test.
If the steering wheel is crooked, an axle alignment must be performed!

Note: After installation is complete, check setting of parking brake! This might need adjustment.

Shock absorber to rear axle 50 Nm + 90°
Mounting bracket to rear axle 120 Nm + 90°
Mounting bracket to body 110 Nm + 90°