Rear Lid

Rear Lid Lock Actuator, Removing And Installing







1 - Release handle
- To remove, disengage locating hooks and pull out release handle.
2 - Seal
3 - Lock actuator

Removing:
- Rear lid lining removed
- Locking system removed

- Using screwdriver, press in and disengage locating hooks on left release handle - 1 - in direction of arrows - A -.
- Pull left release handle - 1 - downward out of handle mechanism - 4 -.
- Remove Phillips-head screws - B - and remove lock actuator.







4 - Handle mechanism
5 - Lock cylinder
- Sealant is sprayed on