Backrest Shell, Removing and Installing

Backrest Shell, Removing And Installing







1 - Backrest
2 - Bolts (4x)
3 - Backrest shell

Removing
- Move seat fully up.
- Remove seat.
- Remove mounting trim pieces.
- Remove side airbag unit.
- Remove backrest upholstery.
- Remove spring cover.
- Unbolt bolts - 2 - (4x) at sides of backrest shell - 3 -.







- Place seat so that backrest shell - 3 - is accessible from below.
- Push both clips - 4 - on bottom of backrest shell - 3 - slightly toward each other.
- Detach backrest shell from seat - 3 - from below.
- Remove backrest shell - 3 - upward.

Installing
- Attach backrest shell - 3 - at upper part of backrest - 1 -.
- Push backrest shell - 3 - down until clips - 4 - engage.
- Tighten bolts - 2 - (4x).

4 - Clips (2x)