With Manufacturer Scan Tool

Diagnostic Trouble Code (DTC) Memory, Erasing (Function 05)

NOTE: If it is not possible to erase the DTC memory, check the DTC memory once again and repair malfunctions.

Requirements
- DTC memory checked With Manufacturer Scan Tool
- All malfunctions repaired

After DTC memory has been successfully checked:

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- to select "Erase DTC Memory" function 05.

Indicated on display:

Rapid data transfer Q
05 Erase DTC Memory

- Press -Q- button to confirm input

Indicated on display:

Rapid data transfer ->
DTC memory is erased!

The DTC memory is now erased.

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- This message indicates an error in the test sequence:

Important!
DTC memory was not interrogated

- This message indicates an error in the test sequence:

Rapid data transfer ->
DTC memory was not interrogated

Adhere exactly to test sequence: First check DTC memory, if necessary
repair malfunctions, then erase.