Fuel Pump and Sensor Fuel Level Display, Component Overview FWD

Fuel Pump and Sensor For Fuel Level Display, Component Overview(Front wheel drive)







1 - Fuel pump
- Removing and installing.
- Check Fuel Pump (FP) electrically. Refer to "Fuel Pump, Electrical Testing (Front wheel drive)", Testing and Inspection
- Checking residual pressure:
2 - Seal
- Always replace
- To install, place into opening of fuel tank when dry.
3 - Return line
- Blue
- From fuel rail
- Attaches to connection with "R" marking at connector flange
- To remove connector flange, press release button on connecting piece
4 - Supply line
- Black
- To fuel filter
- Attaches to connection with "V" marking at connector flange
- To remove from connector flange or from filter, press release button on connecting piece.
5 - 4-pin harness connector
- For Fuel Pump (FP) and sender for fuel gauge -G-
6 - Union nut - 80 Nm
- Use ring nut spanner 3217 to remove and install
7 - Sender for fuel gauge -G-
- Checking resistance values. Refer to "Sender For Fuel Gauge - G -, Checking (Front wheel drive)" under "Instrument Panel, Gauges and Warning Indicators/Fuel Gauge Sender", Testing and Inspection
- Removing and installing