Safety Measures

To avoid personal injury or damaging electrical and electronic components, adhere to the following:
- Connect and disconnect measuring and test instruments only with the ignition switched off.
- For some tests, it is possible that the control module recognizes and stores a malfunction. For this reason, DTC memory must be checked and erased after completing testing or repairs.

If the use of measuring and test instruments is essential during road test, observe the following:


WARNING!
Use of Instrument in Audi TT Coupe:
- Place Instrument in rear seating area and secure by available safety belt.
- Instrument Operator must be seated in the other rear seating position, after sliding front passenger seat and moving the seat back as far as possible. Do not activate the seat back release lever.
- Instrument Operator must wear safety belt.

Use of Instrument in Audi TT Roadster:
- Use only Instrument VAG1551 Scan Tool (ST). DO NOT USE VAS5051.
- Before test, deactivate passenger's airbag using key operated switch in glove compartment.
- Instrument Operator must be seated on passenger seat with safety belt worn.
- Place Instrument in foot well in front of passenger seat in a manner allowing the Operator to use the instrument in a safe manner.
- After completion of test, re-activate front passenger airbag.