Backrest Heating Element, Removing and Installing
Backrest Heating Element, Removing And Installing
Backrest Heating Element (glued In), Removing And Installing
Removing:
- Remove seat: Vehicles until 10.04, vehicles from 11.04.
- Remove backrest: Vehicles until 10.04, vehicles from 11.04.
- Remove cover and padding from backrest, removing and installing (sport seat, standard seat).
- Cut wire - 3 - off of old heating element - 1 -.
Installing:
- Align heating element - 1 - on backrest surface, remove protective foil and glue heating element to cushion.
- Insert electrical wire - 3 - into gap - 4 -.
- Lay wire connections without crossing into bottom of openings at positions - 2 -.