Diagram 302/19 (Tracks 239-252)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Control module with indicator unit in instrument panel insert, Oil Pressure Switch, Brake Fluid Level Warning Switch





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

C - Generator (GEN)

F1 - Oil Pressure Switch Locations

F34 - Brake Fluid Level Warning Switch ABS/Electronic Stabilization Program Overview

G5 - Tachometer

J... - Engine Control Module (ECM)

J234 - Airbag Control Module

J285 - Control module with indicator unit in instrument panel insert

K2 - Generator (GEN) Warning Light

K75 - Airbag Malfunction Indicator Lamp (MIL)

T2 - Double Connector, black, engine compartment, right

T10 - 10-Pin Connector, black, connector station E-box, plenum chamber

T10c - 10-Pin Connector, violet, connector station A-pillar, left

T17d - 17-Pin Connector, red, connector station E-box, plenum chamber

T32a - 32-Pin Connector, green, on instrument panel insert

(261) - Ground connection, in wiring harness heated spray jet

(A17) - Wire connection (61), in instrument panel wiring harness

(A121) - Wire connection (High-bus), in instrument panel wiring harness

(A122) - Wire connection (Low-bus), in instrument panel wiring harness

Previous Diagram 302/18 (Tracks 225-238)

Next Diagram 302/20 (Tracks 253-266)