Diagram 320/2 (Tracks 1-14)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Transmission Control Module (TCM), Park/Neutral Position (PNP) Relay, Ignition/Starter Switch, Fuses
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
B - Starter
D - Ignition/Starter Switch
J217 - Transmission Control Module (TCM)
J226 - Park/Neutral Position (PNP) Relay
M16 - Left Back-Up Light
M17 - Right Back-Up Light
S5 - Fuse in fuse holder/relay panel
S231 - Fuse in fuse holder
T1 - 1-Pin Connector, black, engine compartment, right
T10a - 10-Pin Connector, brown, connector station E-box, plenum chamber
T17d - 17-Pin Connector, red, connector station E-box, plenum chamber
(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment
(83) - Ground connection -1-, in right front wiring harness
(501) - Threaded connection -2- (30), on the relay plate
(A2) - Plus connection (15), in instrument panel wiring harness
(A32) - Plus connection (30), in instrument panel wiring harness
(A70) - Connector (15a, fuse 231), in instrument panel wiring harness
(A87) - Wire connection (RF), in instrument panel wiring harness
(D51) - Plus connection -1- (15), in engine compartment wiring harness
** - For 1.8 l Engine Pin Connector T1d
Next Diagram 320/3 (Tracks 15-28)