A/T Controls - MIL ON/DTC P0706/P1793/P0722
37 07 152012154/10
Oct. 10, 2007
Supersedes Technical Service Bulletin Group 37 number 07-11 dated June
22, 2007 to add a DTC code necessary because of a change in the diagnostic tool software.
Vehicle Information
MIL on, and/or Multitronic Transmission in Emergency Running Mode (DTC P0706, P1793, or P0722 in TCM)
Condition
^ MIL on and/or vehicle in emergency running mode with gear indicator illumination inverted.
^ DTC 17090-P0706 (Transm. Range Sensor Circ. Range/Performance), 18201-P0722 (Output Speed Sensor 2 Circ. No Signal) or DTC 18201-P1793 (Output Speed Sensor 2 Circ. No Signal).
Technical Background
Not applicable.
Production Solution
Not applicable.
Service
It is not necessary to receive an authorization number from the Technical Assistance Center for the repair described in this bulletin.
1. Attach VAS scan tool printouts to the repair order. Warranty requested documents received without VAS scan tool printouts will be denied payment.
2. If DTC 17090-P0706, 18201-P0722 or 18201-P1793 is stored in the fault memory, replace Transmission Control Module.
Refer to Group 38, Transmission Control Module (TCM) J217 Removing and Installing.
Warranty
When procedure applies to vehicles within the New Vehicle Limited Warranty, use the table.
Required Parts and Tools
All part and service references provided in this TSB are subject to change and/or removal. Always check with your Parts Department and service manuals for the latest information.