Resetting Using Buttons on Instrument Cluster

Resetting of Service Display After Service Without VAS 5051.

Note:
A flexible interval can only be calculated for the next service if the Service Interval Display is reset using VAS 5051 / 5052, VAG 1551/52 or the Vehicle Diagnosis Tester.

Reseting indicator via the instrument cluster will result in setting to a fixed service interval value of 1 year / 15,000 km (10,000 miles).
Do not reset the display between service intervals. Doing so will result in an incorrect display.
The service display information will remain intact even if the battery is disconnected.
If a priority 1 malfunction is detected (red symbol), you cannot display the distance remaining.

Switch OFF ignition.






- Press and hold the trip odometer reset button [10] in the instrument cluster and then switch the ignition ON.
- Release the trip odometer reset button

After releasing the trip odometer reset button, the following appears in the display: "SERVICE IN ???? MI" or "SERVICE!".

Press and hold the clock set button in the instrument cluster until: "SERVICE IN ???? MI" or "SERVICE!" is reset.

"SERVICE IN 10000 MI" appears in display

Switch ignition OFF.