Fuel Door: Service and Repair
Tank Flap, Removing And Installing
Special tools and equipment
- Special tool 3370
Removing
- Unscrew the 3 bolts indicated by arrows.
- When installing tank flap, tighten bolts to 4 Nm.
- Lift tank flap out of body vertically using special tool 3370.
- Remove screws -arrows- securing release cable.
Installing
Installation is carried out in the reverse order. When doing this, note the following:
- To avoid kinking overflow hose, install rubber cup as follows:
- Edge of overflow hole must be aligned with edge of square hole, as shown in illustration -arrows-.