Headlamp Control Module: Service and Repair

High Intensity Gas Discharge Lamp Control Modules -J343- And -J344-, Removing And Installing

CAUTION: Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owner's Manual.

WARNING:
- HIGH VOLTAGE!
- Always disconnect battery Ground (GND) strap prior to servicing any parts of the HID lamp system marked with the yellow "HIGH VOLTAGE!" symbol.
- After disconnecting battery, briefly turn headlights on and off in order discharge any residual voltage.

Removing
- Remove left or right headlight.
- Disconnect electrical connection at headlight.








- Remove bracket -3-. Bracket is secured at vehicle with three nuts -2- (SW10).
- Remove bolts -4- and remove control module -1- from bracket -3-.

Installing
- Install in reverse order of removal.