Overview of EVAP Canister System

Overview Of EVAP Canister System







1 Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- Component location: Front right in engine compartment
2 Air filter
- for Leak detection pump (LDP) -V144-
3 Leak detection pump (LDP) -V144-
- Component location: Under wheel housing liner in front right wheel housing
4 Test connection
5 Vent line
- from gravity valve and pressure retention valve at fuel tank
6 EVAP canister
- Component location: Bottom of spare tire well
7 Air filter
- for Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
8 Evaporative Emission (EVAP) Canister Purge Solenoid Valve -N115-
9 Check-valve
- Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
10 Turbocharger
11 Throttle Valve Control Module -J338-
12 Check-valve
- Installation position (light/dark side): Arrow points in direction of aperture, as shown in figure.
13 Check-valve
- inserted in vacuum reservoir
14 Vacuum reservoir
- for Leak detection pump (LDP) -V144-