Diagram 62/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Fuses, Back-Up Light Switch, Washer Nozzle Heaters





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F4 - Back-Up Light Switch Manual Transmission

G70 - Mass Air Flow (MAF) Sensor Component Locations

S3 - Fuse in fuse holder/relay panel

S5 - Fuse in fuse holder/relay panel

S231 - Fuse (on fuse panel)

S235 - Fuse (on fuse panel)

T10c - 10-Pin Connector, violet, connector station A-pillar, left

T17e - 17-Pin Connector, white, connector station E-box, plenum chamber

U - Socket

Z20 - Left Washer Nozzle Heater

Z21 - Right Washer Nozzle Heater

(249) - Ground connection -2-, in wiring harness interior

(261) - Ground connection, in wiring harness heated spray jet

(A52) - Plus connection -2- (30), in instrument panel wiring harness

(A70) - Connector (15a, fuse 231), in instrument panel wiring harness

(A74) - Connector (15a, fuse 5), in instrument panel wiring harness

(D51) - Plus Connection (15) (in engine compartment wiring harness)

* - Heated spray jet only

** - Manual transmission (SG5) only

*** - Manual transmission (SG6) only

**** - => Current wiring diagram for engine

***** - Fuse increased from 30A to 20A (phased in modification)

Previous Diagram 62/16 (Tracks 197-210)

Next Diagram 62/18 (Tracks 225-238)