Measured Value Block, Reading

Measured Value Block, reading

CAUTION: Please observe safety precautions.

Test procedure
- Connect VAS 5051 Vehicle Diagnosis, Measurement- and Information System and in selection touch vehicle system 02 -Transmission Electronics. Ignition must be switched ON.

or, depending on the desired operation:

- Start engine.





Display on VAS 5051:
- In selection touch -1- diagnostic function 08 - Read Measured Value Block.





Display on VAS 5051:
1 - Enter display group
- On key pad -2- enter desired 3-digit display group number =List of Display Groups and confirm entry by touching Q button.

Example:
- Entry 001 for Display group number 001 and confirm by touching Q button.





Display on VAS 5051:
1 - Read Measured Value Block
2 - Display field 1
Display field 2
Display field 3
Display field 4
3 - Display Group X





Note:
^ If a display field is not being used, there will be no display.
^ To switch to another display field, proceed as follows:

- End function 08 - Read Measured Value Block by touching < button.

Display Group Number 001 - 003:

Display Group Number 004 - 006:

Display Group Number 007 - 009:

Display Group Number 010 - 012:

Display Group Number 013 - 125:

List of Selectable Display Group Numbers