Diagram 54/8 (Tracks 85-98)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Left Seat Belt Switch, Right Seat Belt Switch, Rear Safety Belt Tensioner Igniters, Front Passenger's Seat Occupied Sensor





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E24 - Left Seat Belt Switch

E25 - Right Seat Belt Switch

G128 - Front Passenger's Seat Occupied Sensor Passive Occupant Detection System

J234 - Airbag Control Module

N196 - Rear Safety Belt (driver's side) Tensioner Igniter Seat Belt Tensioners

N197 - Rear Safety Belt (front passenger's side) Tensioner Igniter Seat Belt Tensioners

N198 - Center Rear Safety Belt Tensioner Igniter Seat Belt Tensioners

T2aa - 2-Pin Connector, yellow, passenger compartment rear left

T2ab - 2-Pin Connector, yellow, passenger compartment rear right

T2ac - 2-Pin Connector, yellow, passenger compartment rear center

T8b - 8-Pin Connector, black, passenger compartment: near driver's Seat

T8c - 8-Pin Connector, black, passenger compartment: near passenger's Seat

(109) - Ground connection, in airbag wiring harness

(412) - Ground Connection 3 (in seat adjustment wiring harness)

* - with Front Passenger's Seat Occupied Sensor only

** - with rear belt tensioner igniter only

*** - without bladder mat only

Previous Diagram 54/7 (Tracks 71-84)

Next Diagram 54/9 (Tracks 99-112)