"Concert II" Radio Unit, Removing and Installing

"Concert II" Radio Unit, Removing And Installing

Special tools and workshop equipment required







- Radio release tool T10057

Removing







- Push the two clips of radio release tool T10057 into the front of the radio.
- Top L - top left
- Top R - top right
- Pull the radio out of the instrument panel.
- Unplug the connectors and the antenna wire.
- Pull out the release tool from the radio - to do this, press in the locking tabs on the radio.

Installing
- Plug in the connectors and the antenna wire.
- Carefully insert the radio into the instrument panel and let it engage in the installation slot.
- Code radio if replacement unit is installed. Use VAS 5051 Vehicle Diagnostic, Testing and Information System in mode "Vehicle Self-Diagnosis".