Rear Door Handle and Door Lock, Assembly Overview

Rear Door Handle And Door Lock, Assembly Overview
1 - Door handle mount
2 - Fulcrum lever
3 - Door handle
4 - Door lock
- Disengage operating rod -7- from fulcrum lever -2- prior to removing door lock.
- To remove unscrew socket-head bolts -5- and remove door lock out downward.
5 - Socket-head bolt (M8)
- 20 Nm (15 ft lb)
6 - Locating pin
- For securing door lock in zero position (only installed on replacement part)
- Remove locating pin after installing door lock and engage operating rod -7-.
7 - Operating rod