With Manufacturer Scan Tool
Erase DTC Memory (function 05)
NOTE: If DTC Memory cannot be erased, check DTC Memory again and eliminate fault.
Requirements:
- DTC Memory checked
- All faults eliminated
After DTC Memory interrogation:
Implementing function "05 - Erase DTC Memory"
Indicated on display:
Rapid data transfer HELP
Select function XX
- Press keys 0 and 5.
Indicated on display:
Rapid data transfer Q
05 - Erase DTC Memory
- Confirm entry with Q key.
Indicated on display:
Rapid data transfer ->
DTC Memory erased
DTC Memory has now been erased.
- Press -> key.
Indicated on display:
Rapid data transfer HELP
Select function XX
NOTE:
- Test sequence has not been correctly implemented if adjacent display appears.
Attention ->
DTC Memory not checked
- Test sequence has not been correctly implemented if adjacent display appears.
Rapid data transfer ->
DTC Memory not checked
- Keep exactly to test sequence: check DTC Memory first, eliminate any faults and then erase DTC Memory.
- After erasing DTC Memory; implement End Output with function 06; switch ignition off and on again; re-check DTC Memory.