With Manufacturer's Scan Tool
Erase DTC Memory (function 05) and End Output (function 06)
Preconditions:
^ DTC memory has been checked
1. Erase DTC Memory
^ Press the (arrow) button
Display: (Clearance for function selection)
^ Press the -0- and -5- buttons; 05 causes entry of the "Erase DTC Memory" function.
Display:
^ Confirm entry using the Q button
Display:
^ Press the (arrow) button
Display: (Clearance for function selection)
Note:
^ If this display appears, the test sequence is incorrect
^ Adhere precisely to the test sequence: First check the DTC memory, then clear it.
2. End Output
Display:
^ Press the -0- and -6- buttons; this ends output
Display:
^ Confirm entry using Q button
Display:
^ Switch ignition off
^ Disconnect link to VAG 1551 scan tool
"Manufacturer does not provide this information"