Safety Precautions

Safety precautions
If special testing equipment Is required during test drive, note the following:

WARNING:
^ Test and measuring Instruments must be secured to rear seat and operated by a 2nd person from this location.
^ If test and measuring equipment Is operated from the passenger seat, the passenger-side airbag could be activated in case of an accident and could lead to injury to the person seated there.

To reduce the risk of personal injury and/or damage of electric and electronic components, always observe the following:
^ Always switch ignition off before connecting or disconnecting test/measurement tools.
^ It is possible that the control module will recognize a malfunction and store a DTC during some tests. After completing all tests and repairs, DTC memory should therefore be checked and erased if necessary.
^ Always switch ignition off before disconnecting and connecting battery to avoid damaging the transmission control module.