Wheel Stud / Lug Nut

^ Position wheel on wheel hub and secure by hand with two opposing wheel bolts.
^ Screw in remaining wheel bolts by hand. They must screw in easily. Pay attention to exact centering.
^ Relieve load on wheel if necessary by slightly lifting and tightening two wheel bolts slightly by hand.
^ Screw in evenly all wheel bolts by hand.
^ Tighten wheel bolts crosswise to 50 Nm e.g. using a four-way socket wrench.
^ Lower vehicle onto ground and tighten all wheel bolts crosswise to the specified tightening torque.
Tightening torque 120 Nm