01V, 5 Speed A/T

DTC 17101 / P0717





1) First check harness connectors for contact corrosion and water ingress, replace if necessary.





1) First check harness connectors for contact corrosion and water ingress, replace if necessary.

2) Pay attention to which hydraulic control the transmission has when selecting measuring value block. For a more detailed description; Refer to "Read measuring value block".

Note:
The notes for DTC 17101 / P0717 can be found on the next DTC.

Note:
For malfunction recognition of DTC 17101 / P0717

^ Malfunction recognition includes a plausibility test: The ratio from transmission input RPM to engine RPM and transmission output RPM with drive mode selected is implausible. (Test requirement: a driving mode must clearly be selected, not -P- or -N- or between modes and gear must already be engaged).