Cargo Area Floor Trim and Supports (Avant), Removing and Installing

Cargo Area Floor Trim And Supports (Avant), Removing And Installing







1 - Cargo area floor covering (front)
- Remove screws - 2 - (4x) for fastening rings - 3 -.
2 - Screws (2x)
- Tightening torque: 4.5 Nm (40 in lb)
3 - Fastening rings
4 - Support for cargo area floor covering (front wheel drive models)
- Remove front floor covering - 1 -.
- Pull out rear floor covering - 7 - toward the rear.







- Remove cargo area side trim on one side.
- Remove support - 4 - for floor covering.
5 - Support for cargo area floor covering (quattro models)
- Pull out rear floor covering - 7 - toward the rear.
- Detach the two side floor coverings - 8 - and - 6 - (left and right).

Supports - 5 - for floor covering are secured with butyl cord.

- Remove supports - 5 - for floor covering.
6 - Cargo area floor covering (side)
- Secured with adhesive tape
7 - Cargo area floor covering (rear)
- Pull out toward the rear.
8- Cargo area floor covering (side)
- Secured with adhesive tape