Cargo Area Floor Trim and Supports (Vehicles With Children's Bench), Removing and Installing

Cargo Area Floor Trim And Supports (Vehicles With Children's Bench), Removing And Installing







1 - Cargo area floor covering
- Children's bench removed
- Carefully pry out inserts - 2 - and - 3 - with a screwdriver.
- Remove screws - 5 - for fastening rings - 4 -.
- Remove cargo area floor covering - 1 -.
2- Insert (large)
- Pry out carefully with screwdriver.
- Installed at front left
3 - Inserts (small) (2x)
- Pry out carefully with screwdriver.
- Installed at left rear and right front







4 - Fastening rings
5 - Screws (4x)
- Tightening torque: 4.5 Nm (40 in lb)
6 - Cover for spare wheel well
7 - Trim for seat belt buckle
- Unclip and lift out
8 - Lining for spare wheel well
9 - Cover for spare wheel
10 - Support for cargo area floor covering
- Lift out
11 - Base frame