Intermediate Piece At B-Pillar and Coat Hook, Removing and Installing

Intermediate Piece At B-pillar And Coat Hook, Removing And Installing







1 - Intermediate piece
- Pry off cap - 3 -.
- Remove bolt - 2 -.
- Pull intermediate piece - 1 - up and out.
2 - Bolt
- Tightening torque: 3.5 Nm (31 in lb)
- Self-locking
- Always replace
- Always clean threaded holes for bolts (e.g. using a tap)
- For loose (threaded) inserts, tighten inserts using pliers.







3 - Cover
4 - Bolt
- Tightening torque: 3.5 Nm (31 in lb)
- Self-locking
- Always replace
- Always clean threaded holes for bolts (e.g. using a tap)
- For loose (threaded) inserts, tighten inserts using pliers.
5 - Bolt
- Tightening torque: 2 Nm (18 in lb)
6 - Coat hook
- Open coat hook - 6 -.
- Remove bolt - 5 -.
- Remove coat hook - 6 -.
7 - Upper D-pillar trim panel
8 - Upper A-pillar trim