Backrest Hinge Trim, Removing and Installing

Backrest Hinge Trim, Removing And Installing







1 - Mounting trim

Removing
- Remove seat.
- Remove mounting trim - 1 - downward, so that pins - 4 - and tabs - 5 - are pulled out of catches - 6 - and - 7 -.
- Pull out mounting trim - 1 -.

Installing
- On same side of side airbag module, insert insertion edge - 2 - under side airbag module in direction of arrow.
- Press mounting trim - 1 - on in a straight line, so that pins - 4 - and tabs - 5 - engage in catches - 6 - and - 7 -.







2 - Insertion edge
- Only on same side of side airbag module.
3 - Backrest
4 - Pin
5 - Clip
6 - Pin catch
7 - Tab catches