With Manufacturer Scan Tool

Erase DTC Memory (function 05)


NOTE: If DTC Memory cannot be erased, check DTC Memory again and eliminate fault.


Requirements:
- DTC Memory checked
- All faults eliminated

After DTC Memory interrogation:

Implementing function "05 - Erase DTC Memory"

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press keys 0 and 5.

Indicated on display:


Rapid data transfer Q
05 - Erase DTC Memory


- Confirm entry with Q key.

Indicated on display:


Rapid data transfer ->
DTC Memory erased


DTC Memory has now been erased.

- Press -> key.

Indicated on display:


Rapid data transfer HELP
Select function XX


NOTE:
- Test sequence has not been correctly implemented if adjacent display appears.


Attention ->
DTC Memory not checked


- Test sequence has not been correctly implemented if adjacent display appears.


Rapid data transfer ->
DTC Memory not checked


- Keep exactly to test sequence: check DTC Memory first, eliminate any faults and then erase DTC Memory.
- After erasing DTC Memory; implement End Output with function 06; switch ignition off and on again; re-check DTC Memory.