Guide Link Bushings, Replacing

Guide link bushings, replacing
Special tools and equipment





^ 3301 installation tool
^ 3346/ 2 installation tool
^ 3346/ 3 installation tool
^ 3347 installation tool
^ 3347/ 1 installation tool
^ 3347/ 2 installation tool





Remove hydro-bushing at link

Note:
^ When clamping aluminum links, use protective pads.





Installation position of hydro-bushing
The (arrow) -1- on hydro-bushing/groove -2- on the anti-vibration mount point in the direction of joint bolt.
The allowable deviation is ± 5°.





Pull In hydro-bushing
^ Insert anti-vibration mount -A- into special tool (3347/2).
^ Clamp together with sleeve (3347/1), spindle (3346/2) and hex nut.
^ Pull in anti-vibration mount -A- until it stops.