Select Functions

Select functions
The setting-up communication has been set up. You have checked the control module version and pressed the (arrow) button.





Display: (Select function, e.g. 02 - Check DTC Memory)
You can now select one of the functions in this menu. Start troubleshooting using Function 02, "Check DTC Memory"
01- Check Control Module Versions
02- Check DTC Memory
03- Output Diagnostic Test Mode
04- Basic Setting
05- Erase DTC Memory
06- End Output
07- Code Control Module
08- Read Measuring Value Block
10- Adaptation
11- Login-Procedure

How to perform the functions "Erase DTC memory" and "End output".
Read the relevant topic section to find out how to use the other functions.
Press the --0 button if a function has been entirely completed and you want to restore the troubleshooting function to the "Select function" starting point