Shifter CVT: Service and Repair

01J CVT

Removing





- Push shaft piece -1- downward up to stop.
- Pull button -2- from selector lever handle up to catch point (dimension "a") and pull handle upward.
- Dimension a = 3 mm

Installing





- Remove button -2- on dimension "a" carefully from selector lever handle -3-.
- At the same time insert handle -3- with button -2- in driving direction onto selector lever until stop.
- Turn handle -3-, so that button -2- faces the driver. When doing this, the handle slides into a vertical groove of the selector lever.
- Connect handle -3- completely on to selector lever. It must then engage in a ring groove.
- Press button -2- into handle of selector lever -3
- Pull shaft piece -1- upward until it engages on handle for selector lever.