Four-Way Lumbar Support, Removing and Installing

Four-way Lumbar Support, Removing And Installing

Special tools, testers and auxiliary items required







- Engine and transmission holder VAS 6095







- Fixture for seat repair VAS 6136







1 - Four-way lumbar support height adjuster release
2 - Four-way lumbar support release
3 - four-way lumbar support

- Removal:
- Remove seat.
- Mount the fixture for seat repair VAS 6136 on the engine and transmission holder VAS 6095.
- Attach the front seat to the fixture for seat repair VAS 6136.
- Remove side trim on sill side.
- Remove side trim on tunnel side.
- Remove the backrest.
- Remove backrest cover panel.
- Remove backrest frame.
- Disengage release for four-way lumbar adjustment - 2 - at hook - 4 -.
- Disengage four-way lumbar support height adjustment release - 1 - at retaining pin - 5 - and at idler pulley - 6 -.
- Disengage bottom of four-way lumbar support - 3 - at - B - positions (Qty. 2).
- Disengage four-way lumbar support - 3 - above at - A - positions (Qty. 2).

- Installing:
Installation is reverse of removal.
4 - Hook
5 - Retaining pins
6 - Idler pulley