Diagram 65/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Airbag for driver's side and passenger side, seat belt tensioner, igniter





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

D - Ignition/Starter Switch

F138 - Airbag Spiral Spring/Return Spring With Slip Ring

J234 - Airbag Control Module

N95 - Driver's Side airbag Igniter

N131 - Passenger's Side airbag Igniter 1

N153 - Driver's Seat Belt Tensioner Igniter 1

N154 - Passenger's Seat Belt Tensioner Igniter 2

T2a - 2-Pin Connector, yellow-blue, passenger compartment on driver's Seat

T2b - 2-Pin Connector, yellow-blue, passenger compartment on passenger's Seat

T2q - 2-Pin Connector, lilac, passenger compartment on driver's Seat

T2r - 2-Pin Connector, lilac, passenger compartment on passenger's Seat

T4e - 4-Pin Connector, yellow, on Steering Column Electronic Systems Control Module

T4f - 4-Pin Connector, yellow, connector station: interior near glove Compartment

(109) - Ground connection, in airbag wiring harness

(312) - Ground Connection 2 (in Airbag wiring harness)

(637) - Ground Connection (airbag control module)

(A2) - Plus connection (15), in instrument panel wiring harness

* - if it exists

- Short circuit bridge becomes effective when connector is unplugged

Next Diagram 65/3 (Tracks 15-28)