Right Combination Valve For Secondary Air Injection, Removing and Installing

Right Combination Valve For Secondary Air Injection, Removing And Installing

Removing
- Remove right coolant pipe
- Remove engine support bridge 10-222 A from engine compartment.

NOTE: Engine support bridge 10-222 A was necessary to remove right coolant pipe, but it hinders the following work sequence.







- Disconnect vacuum hose - 3 -.
- Remove bolts - 1 -, - 2 - and - 4 - and remove combination valve.

NOTE: Illustration depicts engine from rear.

Installing
Installation is performed in reverse order of removal. Note the following:

NOTE: Replace gaskets.

- Install right coolant pipe Right coolant pipe, removing and installing

Tightening torques

Component Nm
Connecting tube to cylinder 10
head
Connecting tubes to combination 10
valve